14. Enter the password, and then press the [OK] key.
15. Enter the password again to confirm, and then press the [OK] key.
16. Press the [Escape] key.
17. Press the [Escape] key.
18. Press [End].
19. Press the [OK] key.
20. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• You can enter up to 128 characters for the user name.
• You can enter up to 128 characters for the password.
• To change the LDAP Authentication settings, repeat step 3 to 19.
• p.46 "Programming the LDAP server"
• p.230 "Registering Names"
Registering SMTP and LDAP Authentication
347
To Next Page
Loading...
