6. Select [*Not Programmed] using [ ] or [ ], and then press the [OK] key.
7. Select [Realm Name], [KDC Server Name], or [Domain Name] using [ ] or [ ], and then
press the [OK] key.
If you select [Realm Name], proceed to step 8.
If you select [KDC Server Name], proceed to step 9.
If you select [Domain Name], proceed to step 10.
8. Enter the Realm Name, and then press the [OK] key.
Enter the realm name, or host name.
You can enter a realm name using up to 64 characters.
If you enter the realm name, proceed to step 11.
9. Enter the KDC Server Name, and then press the [OK] key.
Enter the KDC server name, host name, or IPv4 address.
You can enter a KDC server name using up to 64 characters.
If you enter the KDC server name, proceed to step 11.
10. Enter the Domain Name, and then press the [OK] key.
Enter the domain name, or host name.
You can enter a domain name using up to 64 characters.
11. Press [End].
12. Press the [User Tools/Counter] key.
Programming the Realm
57
To Next Page
Loading...
