Message Cause Solution
"Fold is not available with the
settings. The job has been
cancelled."
Fold function is not available
with the current settings.
Check the paper settings. For details
about the limitations of the Fold function,
see "Fold", Printer Reference .
"Folding Unit Error." There is a problem with the
Multi-Folding Unit.
Contact your service representative.
"HDD is full." The HDD became full while
printing a Sample Print,
Locked Print, Hold Print or
Stored Print file.
Delete unneeded files stored in the
machine.
Alternatively, reduce the data size of the
Sample Print, Locked Print, Hold Print or
Stored Print file.
"HDD is full." When printing with the
PostScript 3 printer driver, the
HDD's capacity for fonts and
forms has been exceeded.
Delete unneeded forms or fonts
registered in the machine.
"I/O buffer overflow." An input buffer overflow
occurred.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• In [Printer Features], under [Host
Interface], select [I/O Buffer], and
then set the maximum buffer size to
a larger value.
• Reduce the number of files being
sent to the machine.
"Information for user
authentication is already
registered for another user."
The user name for LDAP or
RDH authentication was
already registered in a
different server with a
different ID, and a
duplication of the user name
occurred due to a switching
of domains (servers),etc.
Contact the administrator.
4. Troubleshooting When Using the Printer Function
82
To Next Page
Loading...
Need help?
General
