Message Cause Solution
"Insufficient Memory" A memory allocation error
occurred.
PCL 5e/6
On the printer driver's [Print
Quality] tab, specify a lower
resolution on the [Resolution].
PostScript 3
On the printer driver's [Paper/
Quality] tab, specify a lower
resolution on the [Resolutions:].
RPCS
On the RPCS printer driver's [Print
Quality] tab, open the [Change
User Settings...] dialog box, and
then, on the [Image Adjustments]
tab, specify a lower value for
[Resolution:].
"Memory Retrieval Error" A memory allocation error
occurred.
Turn the main power switch off, and
back on again. If the message appears
again, replace the RAM.
"No response from the server.
Authentication has failed."
A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.
Check the status of the server.
"Output tray has been
changed."
The output tray was changed
because the paper size of the
specified output tray is
limited.
Specify the proper output tray.
Messages Displayed When Using the Printer Function
83
To Next Page
Loading...
Need help?
General
