1. Press [Edit / Color].
2. Press [Color], and then press [Adjust Color].
3. Press [Copy Quality].
4. Adjust the settings.
5. Press [OK] twice.
• [Sharp / Soft], [Contrast], and [Background Density] can each be adjusted, however, their
adjustments can affect the level of other adjustment functions.
• The adjusted settings will be deleted and the initial values will be reset, when Auto Clear has been
performed, when the [Clear Modes] key has been pressed or when the power has been turned off.
• For types and examples of the image adjustment functions, see “Available Color Functions”.
• p.9 "Available Color Functions"
Sharp / Soft
Adjusts the outline of an image.
Adjusting Color and Image Quality
101
To Next Page
Loading...
Need help?
General
