2. Basic Copying
This chapter describes the basic procedure for making copies.
Basic Procedure
This section describes the basic procedure for making copies.
• When User Code Authentication is set, enter your user code (up to eight digits) with the number keys
so that the machine accepts copy jobs. For details about Administrator Tools, see “System Settings”,
Network and System Settings Reference.
• When Basic Authentication, Windows Authentication, LDAP Authentication, or Integration Server
Authentication is set, enter your login user name and password so that the machine accepts copy
jobs. Ask the administrator for the login user name and password. For details, see “When the
Authentication Screen is Displayed”, About This Machine.
• To copy onto paper other than plain paper, specify the paper type in User Tools. For details, see
“System Settings”, Network and System Settings Reference.
• When removing copies from the internal tray, do so carefully to avoid scuffing the printed side. If you
are making many copies, remove them in small batches.
The following procedure explains copying onto paper whose size and orientation matches that of the
originals exactly.
1. Make sure "Ready" appears on the screen.
If any other function is displayed, press the [Copy] key under the display panel on the left side of the
control panel.
Initial copy screen
2. Make sure no previous settings remain.
When there are previous settings remaining, press the [Clear Modes] key.
3. Select the paper tray containing the paper that is the same size and orientation as the
originals.
37
To Next Page
Loading...
Need help?
General
