• You can change reproduction ratios shown on the initial display under Reproduction Ratio in User
Tools. For details about Reproduction Ratio, see “Reproduction Ratio”.
• You can also select a preset ratio on the initial display, press the shortcut reduce/enlarge key. In the
case, proceed to step 3.
• You can select one of 5 preset ratios (2 enlargement ratios, 3 reduction ratios).
• You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of
the image might not be copied or margins will appear on copies.
• p.199 "Reproduction Ratio"
Zoom
You can specify the reproduction ratio in increments of 1%.
• The reproduction ratios you can specify are 25 400%. However, if the originals are placed in the
ADF, the maximum reproduction ratio is 200%. To copy originals at a reproduction ratio above 200%,
you must place them on the exposure glass.
• You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of
the image might not be copied or margins will appear on copies.
Specifying the ratio with [ ] and [ ]
Specify a ratio using [ ] and [ ].
Reducing or Enlarging Originals
53
To Next Page
Loading...
Need help?
General
