1. Placing Originals
This chapter describes the types of originals you can set and how to place originals.
Originals
This section describes the types of originals that can be placed, the paper sizes that are selectable as
regular sizes, and missing image area.
• As the color of markers or highlighters is difficult to reproduce, the copy might not come out depending
on the color or a different color might be copied.
Sizes and Weights of Recommended Originals
The following describes recommended paper sizes and non-recommended originals:
Original location Original size Original weight
Exposure glass Up to 8
1
/
2
× 11
ADF One-sided originals:
A4 A5 , 8
1
/
2
× 14 5
1
/
2
× 8
1
/
2
52 128 g/m
2
(14 lb. Bond
34 lb. Bond)
Two-sided originals: A4 A5 , 8
1
/
2
× 14
5
1
/
2
× 8
1
/
2
60 105 g/m
2
(16 lb. Bond
28 lb. Bond)
• About 50 originals can be loaded in the ADF.
Non-compatible originals for the Auto Document Feeder
Placing unsuitable originals in the ADF can cause paper misfeeds or black lines, or result in damage to the
originals.
Place the following types of originals on the exposure glass instead.
• Originals other than those specified on “Sizes and Weights of Recommended Originals”
• Stapled or clipped originals
• Perforated or torn originals
21
To Next Page
Loading...
Need help?
General
