5. Place the originals, and then press the [Start] key.
Copying onto Custom Size Paper
Makes copies onto custom size paper from the bypass tray.
1. Press [Bypass], and then press the [ ] key.
2. Press [Paper Size].
3. Press [Custom Size].
4. Enter the horizontal size with the number keys, and then press [ ].
5. Enter the vertical size with the number keys, and then press [ ].
6. Press [OK] twice.
7. Place the originals, and then press the [Start] key.
• To change the value you entered, press the item you want to change, and then enter a new value.
• You can register a custom paper size. For details, see “Registering a custom size”. You can also recall
the registered custom paper size. For details, see “Recalling the registered custom size”.
• p.46 "Registering a custom size"
Copying from the Bypass Tray
45
To Next Page
Loading...
Need help?
General
