ADF
CCU019
Horizontal size
Vertical size
8.5 49.6 inches
216 1260 mm
Maximum scanning area
• When you copy custom size originals, make sure you specify the size of the originals. If not, the image
may not be copied properly. For details about custom size originals, see “Custom sizes”.
• When scanning two-sided originals with the ADF, the maximum horizontal length of the scanning area
is 355.6 mm (14 inches).
• p.34 "Custom sizes"
Missing Image Area
Even if you place originals in the ADF or on the exposure glass correctly, margins of a few millimeters on
all four sides of the original might not be copied.
1. 2 ± 1.5 mm (0.08 ± 0.06 inches)
2. 4.2 ± 2.7 mm (0.17 ± 0.11 inches)
3. 2 ± 1.5 mm (0.08 ± 0.06 inches)
4. 4.2 ± 1.5 mm (0.17 ± 0.06 inches)
Originals
23
To Next Page
Loading...
Need help?
General
