1. Press [Edit / Color].
2. Press [Erase].
3. Press [Erase Center / Border].
4. Press [Erase Center/ Border].
5. Press [Different Width].
6. Press the key you want to change and specify an erase width with [ ] and [ ].
Pressing [ ] or [ ] changes the width in increments of 1 mm (0.1 inch). Pressing and holding down
the relevant key changes the width in increments of 10 mm (1 inch).
To specify another erase width, repeat step 6.
7. Press [OK] twice.
• To change the value you entered, press [ ] and [ ], and then specify a new value.
Image Repeat
The original image is copied repeatedly.
Advanced Copier Functions
149
To Next Page
Loading...
Need help?
General
