Ricoh Aficio MP C4000 Function Guide

10. If necessary, press [Original Feed Type] to specify settings such as original orientation.
For details, see "Setting of Original Feed Type".
11. If necessary, press [Send File Type / Name] to specify settings such as file format and file
name.
For details, see "Specifying the File Type and File Name".
12. Press the [Start] key.
When scanning batches, place subsequent originals after the scan files have been sent.
When writing is complete, a confirmation message appears.
13. Press [Exit].
14. Remove the memory device from the media slot.
Do not remove the memory device while writing is in process. Doing so can corrupt the data that is
stored on it.
• You cannot specify where the data is saved. Files are saved in the root directory of the removable
memory device.
• Up to 2 GB of data can be saved. However, depending on the number of files already stored on the
removable memory device, new files might not be saved, even if there appears to be sufficient free
space.
• If the removable memory device is partitioned, files are saved on the first partition.
• You cannot configure file information such as [User Name], [File Name], and [Password].
• To cancel writing, press the [Clear/Stop] key. If files are being written when writing is cancelled, any
partially written files are deleted. Only complete files are stored on the removable memory device.
• The LED lamp on the media slot flashes when an inserted SD card is being accessed and remains limit
when a USB memory stick is attached.
• p.147 "Various Scan Settings"
• p.156 "Adjusting Image Density"
• p.157 "Setting of Original Feed Type"
• p.166 "Specifying the File Type and File Name"
5. Saving Scan Files on a Removable Memory Device
116
5

Ricoh Aficio MP C4000 Specifications