Ricoh Aficio MP C4000 Function Guide

Mac OS X
This section explains how to configure a Mac OS X to use EtherTalk, USB and TCP/IP.
Follow the procedure below to configure Mac OS X 10.3.8. If you are not using Mac OS X 10.3.8, see
the manual of the Mac OS X you are using for details.
• For Mac OS X 10.1 or higher.
• The PPD files are stored in the following folder on the CD-ROM.
• Mac OS X: MacOSX PPD Installer
Installing the PPD Files
Follow the procedure below to install a PPD file to print from Mac OS X.
• You need an administrator name and a password (phrase). For details, consult your network
administrator.
1. Insert the CD-ROM into the CD-ROM drive.
2. Double-click the CD-ROM drive icon.
3. Double-click the [Mac OS X] folder.
4. Double-click the MacOSX PPD Installer folder.
5. Double-click the installer icon.
6. Follow the instructions on the screen.
Setting Up the PPD File
1. Start Printer Setup Utility.
2. Click [Add].
Mac OS X 10.4 or later
Click a printer that has “AppleTalk” indicated in the “Connection” column.
If the zone is set, click [More Printers...], and then select the zone from the second pop-up menu.
Other Mac OS X
Click [AppleTalk] on the first pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
Mac OS X
61
2

Ricoh Aficio MP C4000 Specifications