1-921-011 By-Pass: Plain E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Reflects adjustment values with no change.
1-921-012 By-Pass: Thick E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Adds on to the adjusted values of the Plain
paper.
1-921-013 By-Pass: Envelope E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Adds on to the adjusted values of the Plain
paper.
1-921-021 Tray1: Plain E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Reflects adjustment values with no change.
1-921-022 Tray1: Thick E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Adds on to the adjusted values of the Plain
paper.
1-921-023 Tray1: Envelope E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Adds on to the adjusted values of the Plain
paper.
1-921-031 Tray2: Plain E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Reflects adjustment values with no change.
1-921-032 Tray2: Thick E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Adds on to the adjusted values of the Plain
paper.
1-921-061 Duplex: Plain E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Reflects adjustment values with no change.
1-921-062 Duplex: Thick E
[-4.0 to 4.0 / 0.0 / 0.1mm/step]
Adds on to the adjusted values of the Plain
paper.
1922
[Fact S-to-S Reg]
Reflects adjustment values with no change.
• To move the start position to the right, increase the value (+).
• To move the start position to the left, decrease the value (–).
Main SP Tables-1
25
To Next Page
Loading...
