2-301-003 T(+)_2_BackOffset E
[-15 to 15 / 0 / 1uA/step]
Displays the setting of the offset amount of
transfer constant current level during creating
an image on the back page.
2-301-101 Used Adjust A2 E
[0 to 100 / 80 / 1%/step]
Output adjustment for the value of the
transfer output table which is to be a basis
when the transfer paper count is in the range
of 15K and 30K.
2-301-102 Used Adjust A3 E
[0 to 100 / 70 / 1%/step]
Output adjustment for the value of the
transfer output table which is to be a basis
when the transfer paper count is in the range
of 30K and 60K.
2-301-103 Used Adjust A4 E
[0 to 100 / 65 / 1%/step]
Output adjustment for the value of the
transfer output table which is to be a basis
when the transfer paper count is in the range
of 60K and 90K.
2-301-104 Used Adjust A5 E
[0 to 100 / 60 / 1%/step]
Output adjustment for the value of the
transfer output table which is to be a basis
when the transfer paper count is over 90K.
2401 [Timing Control]
2-401-003 T[rotation print] E [600 to 9900 / 600 / 100msec/step]
2-401-004 T[rotation WU] E [600 to 9900 / 5000 / 100msec/step]
2411 [envi_section]
2-411-001 AH_LM E
[0.0 to 10.0 / 5.5 / 0.5g/m
3
/step]
Displays and adjusts the threshold under
low/mid humidity on environment section in
regard to control the Environment Correction.
3. Appendices: SP Mode Tables
32
To Next Page
Loading...
