5067
[Parts PM System]
Selects the whether to perform the service management or user management as the
PM management. The system banner and the message in which the system warning
screen appears varies according to this setting.
5-067-001 PCDU C [0 or 1 / 0 / 1/step]
0: Service management
1: User management
5-067-009 Fusing Unit C
5083
[Led Switch]
Specifies whether the alert LED is lit or not when toner near end condition is
detected. (This does not change the toner near end condition indication in the
operation panel LCD.)
5-083-001 Toner Near End C
[0 or 1 / 0 / 1/step]
0: Off
1: On
5302
[Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
JP: +540 (Tokyo)
NA: -300 (New York)
EU: + 60 (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
KO: +540 (Korea)
5-302-002 Time Difference C [-1440 to 1440 / -300 / 1min./step]
5305
[Auto Off Set]
Auto Off Limit Set
5-305-101 Set Disp C
[0 or 1 / 1 / 1/step]
0:Off, 1:On
3. Appendices: SP Mode Tables
42
To Next Page
Loading...
