5507
[Supply Alarm]
Enables or disables the notifying a supply call via the @Remote.
5-507-003 Toner C
[0 or 1 / 1 / 1/step]
Switches the control call on/off for the stapler
installed in the finisher. DFU
If you select "1" the alarm will sound when the
copier detects toner end.
0: Off
1: On
5-507-006 WasteTonerBottle C
[0 or 1 / 1 / 1/step]
0: Off
1: On
5-507-080 Toner Call Timing C
[0 or 1 / 0 / 1/step]
0: At replacement
1: AtLessThanThresh
Changes the timing of the "Toner Supply Call"
via the @Remote, when the following
conditions occur.
5-507-081 Toner Call Thresh C [10 or 90 / 10 / 10%/step]
5515
[SC/Alarm Setting]
With NRS (New Remote Service) in use, these SP codes can be set to issue an SC
call when an SC error occurs. If this SP is switched off, the SC call is not issued when
an SC error occurs.
5-515-001 SC Call C
[0 or 1 / 1 / 1/step]
0: Off
1: On
5-515-004 User Call C
5-515-006 Communication Test Call C
5-515-007 Machine Information Notice C
5-515-010
Supply Automatic Ordering
Call
C
5801 [Memory Clear]
Main SP Tables-5
43
To Next Page
Loading...
