Ricoh Aficio MP171 - Page 212

5-801-001 All Clear C
[- / - / -]
[Execute]
Restores the set value which the controller
keeps to the initial value (with certain
exceptions).
* The engine SP clear (SP5-801-002) is not
executed.
5-801-002 Engine E
[0 or 1 / 0 / 1/step]
Initializes all registration settings for the
engine and copy process settings.
5803
[INPUT Check]
See “page 79 "Input Check Table"”
5804
[OUTPUT Check]
See “page 80 "Output Check Table"”
5810
[SC Reset]
Cancel SC of the CE cancellation.
5-810-001 Fusing SC Reset E
[0 or 1 / 0 / 1/step]
[Execute]
5811 [MachineSerial]
5-811-002 Display E
[0 to 255 / 0 / 1/step]
Displays the machine serial number.
5-811-004 BCU E
[0 to 255 / 0 / 1/step]
Inputs the machine’s serial number.
5811 [Machine No. Setting]
5-811-003 ID2 Code Display C
[- / - / -] [17digit characters]
Sets the ID-2 code for recognizing
equipment when setting CSS. (for remote
access only)
3. Appendices: SP Mode Tables
44