Making Printer Settings Using the Control Panel
56
5
❖ Energy Saver 1
You can specify whether or not to switch to Low Power Standby mode.
Low Power Standby mode lowers the fusing unit temperature.
When the printer switches to Low Power Standby mode, a message appears
on the control panel, or the control panel indicators and display appear unlit.
The Ethernet indicator remains lit.
Default: On
•On
•Off
❖ Energy Saver 2
You can specify the number of minutes the Energy Saver mode is applied.
The Energy Saver mode reduces electric power consumption.
• E.Saver2 On/Off
You can specify whether or not to switch to the Energy Saver mode.
When the printer switches to Energy Saver mode, the indicators and panel
display are unlit; however, the Ethernet indicator remains lit.
Default: On
•On
•Off
•E. Saver2 Timer
Select the lead time needed to switch to Energy Saver mode.
Default: 15 minutes
•5 minutes
• 15 minutes
• 30 minutes
• 60 minutes
❖ B&W Page Detect
You can specify whether or not to recognize black-and-white images.
Use the black-and-white recognition function to print all monochrome pages
in monochrome mode even if color printing is specified.
Default: On
•On
•Off
To Next Page
Loading...
Need help?
General