Ethernet Configuration
31
4
E Press the {T} or {U} key to select [On], and then press the {#Enter} key.
The address detected by the printer will appear.
F Press the {Menu} key.
The initial screen appears.
G Print a configuration page to confirm the settings made.
Reference
For details about printing the configuration page using control panel, see
p.16 “Test Printing”.
Specifying an IP Address (No DHCP)
Use the following procedure to assign a specific IP address to the printer. This
procedure is only necessary if you want to use the printer on a network without
DHCP, or want to prevent the printer's IP address from changing.
Before beginning this procedure, make sure you have the IP address, subnet
mask, and gateway address that the printer will use.
A Press the {Menu} key.
B Press the {T} or {U} key to display [Host Interface], and then press the {#En-
ter} key.
DHCP:
On
ASI066S
Menu:
Host Interface
To Next Page
Loading...
Need help?
General