Configuration
32
4
C Press the {T} or {U} key to display [Network Setup], and then press the {#En-
ter} key.
D Press the {T} or {U} key to display [DHCP], and then press the {#Enter} key.
E Press the {T} or {U} key to select [Off], and then press the {#Enter} key.
The address detected by the printer will appear.
F Press the {T} or {U} key to display [IP Address], and then press the {#Enter}
key.
G Press the {T} or {U} key to enter the address, and then press the {#Enter}
key.
Press the {T} or {U} key to enter the left most entry field of the address. After
entering the left field, press the {#Enter} key, and then you can enter the next
field. After completing to enter in the all field, press the {#Enter} key.
H Use this method to assign Subnet Mask and Gateway Address.
I Press the {Menu} key.
The initial screen appears.
J Print a configuration page to confirm the settings made.
Reference
For details about printing the configuration page using control panel, see
p.16 “Test Printing”.
Host Interface:
Network Setup
Network Setup:
DHCP
DHCP:
Off
Network Setup:
IP Address
IP Address:
0.0.0.0
To Next Page
Loading...
