5
2. Installing the Printer and
Options
Installing the Printer
This section describes how to install the printer and perform settings after instal-
lation.
Where to Put the Printer
The printer’s location should be carefully chosen because environmental condi-
tions greatly affect its performance.
WARNING:
• The supplied power cord is for use with this equipment only. Do not
use with other appliances. Doing so may result in fire, electric shock,
or injury.
• Keep the machine away from flammable liquids, gases, and aerosols.
A fire or an electric shock might occur.
• The wall outlet shall be installed near the machine and shall be easily
accessible.
• Connect the machine to the power source specified in this manual
and do not use any other power sources. Connect the power cord di-
rectly to a wall outlet and do not use an extension cord. Power sourc-
es not specified in this manual and extension cords are electric shock
or fire hazards.
• Power cords that are damaged, broken, modified, trapped under
heavy objects, pulled hard, or bent severely are electric shock and fire
hazards.
To Next Page
Loading...
Need help?
General