Monitoring and Configuring the Printer
70
6
❖ Network
Displays the [Network] page.
On the [Network] page, following operations are possible:
• Checking the information of the printer
•Interface settings
•Protocol settings
• Resetting to factory-set defaults
Changing the paper settings
On the [Paper] page, you can change paper size and other paper settings.
❖ Tray 1
• Paper Size
Specify the paper size for tray 1.
A4, B5 JIS, A5, 8 1/2 x 14, 8 1/2 x 11, 7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13,
8 1/4 x 13, Custom Paper Size
•Unit
Specify the unit of measurement in "mm" or "inch".
• Horizontal
Specify the horizontal width between 148 and 216 mm (5.83 and 8.50 inches).
•Vertical
Specify the vertical length between 210 and 356 mm (8.27 and 14.02 inches).
•Paper Type
Specify the paper type for tray 1.
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper,
Letterhead, Preprinted Paper, Prepunched Paper
❖ Tray 2
• Paper Size
Specify the paper size for tray 2.
A4, 8 1/2 x 11
•Paper Type
Specify the paper type for tray 2.
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper,
Letterhead, Preprinted Paper, Prepunched Paper
❖ Bypass Tray
• Paper Size
Specify the paper size for the bypass tray.
A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2,
7 1/4 x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2,
C5 Env, C6 Env, DL Env, 16K, Custom Paper Size, Any Size
•Unit
Specify the unit of measurement in "mm" or "inch".
To Next Page
Loading...
Need help?
General