Using PostScript 3
107
9
❖ Watermark Font Typeface
Use this function to select the watermark font typeface.
In the [Feature Sets] list, select [Watermark Text], and then, select the watermark
typeface.
❖ Watermark Font Shading
Use this function to select the watermark font shading.
In the [Feature Sets] list, select [Watermark Text], and then, select the watermark
font shading in the list.
❖ Watermark Position
Use this function to select the watermark position.
In the [Feature Sets] list, select [Watermark Location]. Then, in the [Watermark Po-
sition (Horizontal)] and [Watermark Position (Vertical)] lists, select the horizontal
and vertical positions, respectively.
❖ Watermark Angle
Use this function to select the watermark angle.
In the [Feature Sets] list, select [Watermark Location], and then , select the water-
mark angle in the list.
❖ Watermark
Use this function to select which page(s) to print the watermark on.
In the [Feature Sets] list, select [Watermark Location], and then, in the [Watermark]
list, select which page(s) you want to print the watermark on.
You can select Off, First Page Only, or All Pages.
To Next Page
Loading...
