Installing Options
19
2
F After installing the option, print the configuration page to confirm the in-
stallation.
Note
❒ When moving the printer, remove the optional paper feed unit.
❒ Before using the optional paper feed unit, you can make settings in the
printer driver.
❒ If the new device is listed in the column of configuration options, then it
has been properly installed.
❒ If the optional paper feed unit is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
Reference
For details about printing the configuration page using control panel, see
p.16 “Test Printing”.
For details about loading paper into the paper tray, see p.47 “Loading Paper”.
When adjusting the printing position, see Software Guide.
To Next Page
Loading...
