Paper and Other Media
38
5
•
Use the control panel to specify the size.
•
Use the control panel to specify a size as a custom size.
The following sizes are supported:
Tray 1 (approximately): width 90 - 216 mm (3.54 - 8.5 inch); length 148 - 356
mm (5.83 - 14 inch)
Bypass Tray (approximately): width 90 - 216 mm (3.54 - 8.5 inch); length 148
- 356 mm (5.83 - 14 inch)
•
The size is not supported.
❖ Paper weight and number of sheets to be set
Check that the top of the stack is not higher than the limit mark inside the
tray.
C5 Env 162 × 229 6.38” × 9.02”
C6 Env 114 × 162 4.49” × 6.38”
DL Env 110 × 220 4.33” × 8.66”
Monarch Env 98.4 × 190.5 3.875” × 7.5”
16K 195 × 267 7.68 ” × 10.5 ”
Custom Paper Size - -
Supported paper weight
Maximum number of
sheets (plain paper)
Tray 1
60 - 160 g/m
2
(16 - 42 lb.) 250 (80 g/m
2
, 20 lb.)
Bypass Tray
60 - 160 g/m
2
(16 - 42 lb.)
1
Paper Feed Unit (Tray 2)
60 - 105 g/m
2
(16 - 28 lb.) 500 (80 g/m
2
, 20 lb.)
Size (mm)
Size (inch)
Standard Input Tray 1
Paper Feed Unit TK1010 (Tray 2)
Bypass Tray
Duplex
To Next Page
Loading...
Need help?
General