Paper Recommendations
43
5
Envelope
• Before loading envelopes, flatten them out so that their
curl does not exceed that shown in the illustration below.
If the curl is severe, flatten out the envelopes using your
fingers, as shown in the illustration below.
• If envelopes are severely curled after printing, flatten
them by bending them back against the curl.
• After printing, envelopes sometimes have creases along
their long edges and toner smear on their unprinted
sides. Their print images might also be blurred. When
printing large, black-solid areas, striping can occur as a
result of the envelopes overlapping.
Paper Type
Thickness (g/m
2
)
Duplex
Enabled paper
feeding tray
Note
Tray 1
Tray 2
ASH122S
ASH123S
To Next Page
Loading...
