5. Load the new paper stack print side up.
Confirm that there are no gaps between the paper and paper guides. If there are gaps, adjust the
guides.
6. Lock the side guides.
7. Push the paper tray carefully into the printer until it stops.
If you push the tray forcefully, the paper guides might move.
• For details about types of paper supported by this printer, see p.81 "Supported Paper for Each
Tray".
Loading paper not automatically detected by this printer
Set the paper size on the control panel to load paper whose size cannot be detected automatically into
trays 2 to 5.
Loading Paper
99
To Next Page
Loading...
