Installing the Gigabit Ethernet Board
• The printer’s Ethernet and USB ports are not available when the Gigabit Ethernet board is attached
to the printer. Use the Ethernet and USB ports on the Gigabit Ethernet board.
• Before beginning work, ground yourself by touching something metal to discharge any static elec-
tricity. Static electricity can damage the Gigabit Ethernet board.
• Do not subject the Gigabit Ethernet board to physical shocks.
1. Check the contents of the package.
Use the included ferrite core when connecting an Ethernet cable to the board.
2. Turn the printer off and unplug the power cable.
3. Unplug cables from the USB and Ethernet ports, and then cover them with the protective
caps.
Installing the Gigabit Ethernet Board
43
To Next Page
Loading...
Need help?
General