per 4]. High numbered settings allow thicker paper
to be used, but are printed more slowly.
When selecting the paper setting depending on the
type, select [Coated Paper 5] to [Coated Paper 7].
High numbered settings allow thicker paper to be
used, but are printed more slowly.
Additional cautions
• Print speed is slightly slower than when using
plain paper.
Special paper
Special paper standard
When you cannot print successfully with other pa-
per type settings, set special paper.
Printer setup
Select [Paper Input] [Paper Type: XXX] (XXX:
Tray 1 to 5, Bypass Tray) [Special Paper 1] to
[Special Paper 3].
Printer driver setup
Select [Special Paper 1] to [Special Paper 3] in
[Paper Type].
Supported paper feeding tray
Any input tray can be used.
• Make sure paper is not stacked higher than
the upper limit mark ( ) inside the tray. When
using the bypass tray, make sure paper is not
stacked higher than the paper guides inside
it.
Duplex printing Supported
Envelopes
Printer setup
Select [Paper Input] [Paper Type: Bypass Tray ]
[Envelope].
Printer driver setup Select [Envelope Settings] in [Paper Type].
Supported paper feeding tray Bypass tray
Paper Recommendations
93
To Next Page
Loading...
