11. Press the [ ] or [ ] key to select [Specify], and then press the [OK] key.
If you do not select [Specify] in this step, the address you set will not be saved.
12. Press the [Menu] key to return to the initial screen.
13. Print a configuration page to confirm the settings.
• For details about printing the configuration page, see “Test Printing”, Quick Installation guide.
Receiving an IP Address Automatically (DHCP)
Follow this procedure to set the printer to receive an "IP address" automatically using "DHCP". The "DHCP"
feature is active by default, so this procedure is only required if you have changed the default settings.
• When [DHCP] is selected, you cannot configure settings for the following items:
• "IP Address"
• "Subnet Mask"
• "Gateway Address"
• Consult your network administrator for information about configuring network settings.
1. Press the [Menu] key.
4. Configuration
70
To Next Page
Loading...
