About two seconds later, the display returns to the Paper Input screen.
9. Press the [Online] key.
The display returns to the initial screen.
• Make sure paper is not stacked higher than the paper guides inside the bypass tray.
• Be sure to select the appropriate paper type when you load labels, thick paper, envelopes, or OHP
transparencies in the bypass tray.
Loading custom size paper
• When printing on custom size paper, specify the paper size using the control panel or printer driver.
• The custom size paper selected using the printer driver overrides that selected using the control panel.
Do not configure settings using the control panel if you have already configured settings using the
printer driver. However, when printing with a printer driver other than the RPCS printer driver, you
must configure the settings using the control panel.
• The printer cannot print to custom size paper from applications that do not support custom size paper.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
5. Paper and Other Media
110
To Next Page
Loading...
