• Be sure to select the appropriate paper type when you load labels, thick paper, envelopes, or OHP
transparencies in the bypass tray.
• The paper type selected using the printer driver overrides that selected using the control panel.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Type: Bypass Tray], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper type that is loaded, and then press the [OK] key.
About two seconds later, the display returns to the Paper Input screen.
5. Press the [Online] key.
The display returns to the initial screen.
5. Paper and Other Media
112
To Next Page
Loading...
