4. If the paper could not be removed, raise the R5 lever and remove the paper.
5. Return the R5 lever to its original position.
6. If the paper could not be removed, move the R6 lever and remove the paper.
7. Return the R6 lever to its original position.
8. Close the front cover of the finisher.
When R7, R8, R9, R10, or R11 is displayed.
• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple
unit. You can trap your fingers if you do not.
10. Removing Misfed Paper
210
To Next Page
Loading...
Need help?
General