Router/HUB
Printer
[10Mbps Half
D.]
[10Mbps Full
D.]
[100Mbps
Half D.]
[100Mbps Full
D.]
[Auto Select]
auto-negotia-
tion (auto se-
lection)
- -
• Connection cannot be established if the selected Ethernet speed does not match your network's trans-
mission speed.
• The use of this feature is recommended. To use it, select [Auto Select].
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Network], and then press the [OK] key.
4. Configuration
74