Problem Cause Solution
Documents and reports do
not print out.
There is no paper left. Load paper. For details about loading
paper, see p.49 "Loading Paper".
An error has occurred. A function that has the status
"Error Occurred" in the
[Check Status] screen is
defective.
Press [Check], and then check the
displayed message and take
appropriate action. For details about
error messages and their solutions, see
p.91 "When Messages Are
Displayed".
The printer is unable to
connect to the network.
A network error has
occurred.
• Press [Check], and then check the
displayed message and take
appropriate action. For details
about error messages and their
solutions, see p.91 "When
Messages Are Displayed".
• Check that the printer is correctly
connected to the network and that
the printer is correctly set. For
details about how to connect the
network, see "Interface Settings",
Operating Instructions.
• For details about connecting to
the network, contact your
administrator.
• If the indicator is still lit even after
trying to solve the problem as
described here, contact your
service representative.
3. Troubleshooting
78
To Next Page
Loading...
