Ricoh GR - Page 108

3
Changing Camera Settings
106
1 Select [ADJ. Lever Setting] in the [Key Custom Options] menu
and then press the $ button.
The [ADJ. Lever Setting] screen appears.
2 Use the !" buttons to select any of [ADJ. Lever Setting 1] to
[ADJ. Lever Setting 5] and then press the $ button.
3 Use the !" buttons to select the
function to register and then press
the # button.
Repeat steps 2 and 3.
4 Press the MENU/OK button.
5IF<,FZ$VTUPN0QUJPOT>NFOVSFBQQFBST
Using ADJ. Mode
1 Press the ADJ. lever in shooting mode.
The mode becomes ADJ. mode.
2 Use the #$ buttons to select the
function you want to set.
Any of ADJ. Lever Setting 1 to ADJ. Lever Set-
ting 5 can be selected.
3 Use the !" buttons to select a value.
4 Press the MENU/OK button.
The selected function is set.