Ricoh GR - Setting the Color Temperature; Setting the White Balance

1
Various Shooting Functions
61
Caution -------------------------------------------------------------------------------------------------------
t 5IFXIJUFCBMBODFNBZOPUCFBEKVTUFEDPSSFDUMZGPSBTVCKFDUUIBUJTNPTUMZEBSL
t 8IFOTIPPUJOHXJUIUIFGMBTIUIFXIJUFCBMBODFNBZOPUCFBEKVTUFEDPSSFDUMZJG<"VUP>PS<.VMUJ1
AUTO] is not selected.
Setting the Color Temperature
1 Select [Detail] under White Balance, and then press the Fn2
button.
The [White Balance Detailed Settings] screen appears.
2 Set the value with the !" buttons.
Values from 2500 K to 10000 K can be set.
If the Fn2 button is pressed, the white bal-
ance can be corrected. If the Fn2 button is
pressed again, the screen returns to the
color temperature settings.
3 Press the MENU/OK button.
The [White Balance] screen returns.
4 Press the MENU/OK button.
The shooting screen returns.
Setting the White Balance
1 Select [Manual] for white balance.
2 Aim the camera at a white subject, such as a sheet of paper,
under the light where you will be shooting.
3 Press the Fn2 button.
The white balance will be measured.
4 Press the MENU/OK button.
The shooting screen returns.
Note -----------------------------------------------------------------------------------------------------------
t *GUIF'OCVUUPOJTQSFTTFEXIJMFUIFGMBTIJTCFJOHGJSFEUIFXIJUFCBMBODFDBOCFNFBTVSFEXIFO
the flash fires.