Ricoh GR - Checking the Firmware Version; Setting the Copyright Notice

3
Changing Camera Settings
113
Setting the Copyright Notice
:PVDBOTFUBDPQZSJHIUOPUJDFUPCFXSJUUFOBTExif data when images are
shot.
1 Select [Copyright notice] in the [Setup] menu and then press the
$ button.
The [Copyright notice] screen appears.
2 Press the " button.
The cursor moves to the character selection
area.
3 Use the !"#$ buttons to select a
character and then press the MENU/
OK button.
:PV DBO FOUFS VQ UP  IBMG XJEUI BMQIBOV-
meric characters and symbols. The character type can be changed with the
Fn2 button.
4 Press the ADJ. lever.
The copyright notice is registered, and then the [Setup] menu reappears.
Note -----------------------------------------------------------------------------------------------------------
t "DPQZSJHIUOPUJDFUIBUIBTCFFOXSJUUFOUPBOJNBHFDBOCFDIFDLFEJOUIFEFUBJMFEJOGPSNBUJPO
displayed in the playback screen.
Checking the Firmware Version
:PVDBOWJFXUIFDBNFSBGJSNXBSFWFSTJPOJO<Confirm Firmware Version] of
the [Setup] menu. When there is a firmware file in the memory card, you can
update the firmware.
For information on version updates, check the PENTAX RICOH IMAGING web-
site (http://www.ricoh.com/r_dc/support/).