Ricoh GR - Page 88

2
Playback Functions
86
Setting/Canceling Protection for All Files
1 Select [Protect] in the [Playback] menu and then press the $
button.
2 Select [Select All] or [Cancel All] and then press the MENU/OK
button.
Setting Protection for Multiple Files Simultaneously
1 Select [Protect] in the [Playback] menu and then press the $
button.
When in 20-frame or 81-frame view, go to step 3.
2 Select [Sel. Multiple] and then press the MENU/OK button.
3 Select [Sel. Indiv.] or [Sel. Range] and then press the MENU/OK
button.
4 Use the !"#$ buttons to select files and then press the MENU/
OK button.
If you selected [Sel. Range], select only the file that is the starting point of
the range.
8IFODBODFMJOHQSPUFDUJPOQSFTTUIF.&/60,CVUUPOBHBJO
Pressing the ADJ. lever switches between [Sel. Indiv.] and [Sel. Range].
If you selected [Sel. Indiv.], go to step 6.
5 Use the !"#$ buttons to select
the file that is the ending point of
the range and then press the MENU/
OK button.
Repeat steps 4 to 5 to specify all of the ranges.
If you select files with protection already set,
protection will be canceled.
6 Press the Fn2 button.
A message appears to indicate processing is being performed, and then the
thumbnail view screen reappears when the setting is complete.
7 Press the MENU/OK button.
The [Playback] menu reappears.