English
39
English
User Settings
The Projector has a multilingual On Screen Display that
allows you to make image adjustments and change a variety of
settings.
How to operate
1. To open the OSD, press “Menu” on the Control Panel or Remote
Control.
2. When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
or “Enter” key to enter sub menu.
3. Use keys to select the desired item in the sub menu and
press or “Enter” key to view further settings. Adjust the
settings by using key or key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Enter”, and the screen will return to the previous menu.
6. Press “Menu” or key to return to the main menu.
7. To exit, press “Menu” again. The OSD menu will close and the
projector will automatically save the new settings.
Using the On Screen Display (OSD)
If no button
operation is made
for approximately 10
seconds, the OSD will
be closed automatically.
N
o
t
e
Picture Mode
Picture
Vivid
Wall Color
White
Gamma
NCE
Brightness
Contrast
Sharpness
Select
Enter
Exit
Color Temperature
Saturation
Sub Menu
Setting
Main Menu
Off
Tint
To Next Page
Loading...
Need help?
General
