Ricoh Mizar-PJ2 cw Series User Manual

English
51
English
User Settings
OPTIONS
Auto Source
When this function is turned “On”, the projector will search for
other signals if the current input signal is lost. When this function is
turned “Off”, it will only search a specied connection port.
Auto Source On Off
Input
Use this option to enable/disable input sources. Press the ► key
to enter the sub menu and select which sources you require. Press
“Enter” to nalize the selection. The projector will only search for
inputs that are enabled.
EnterExitSelect
Input
HDMI1/MHL
HDMI2
Computer
S-Video
Video
Auto Power Off (Min)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has nished (in
minutes). When countdown timer is selected to “0”, auto power off
is disabled.
Power Down Timer Active
Auto Source
Options
Input
Auto Power Off (Min)
High Altitude
Dust Filter Reminder
Information
Select
Enter
Exit
On
Lamp Settings
Off
Default value
of “Auto Power Off
(Min)” is 20 min.
N
o
t
e

Ricoh Mizar-PJ2 cw Series Specifications

General

Brand	Ricoh
Model	Mizar-PJ2 cw Series
Category	Projector
Language	English