Ricoh Mizar-PJ2 cw Series User Manual

English
63
English
LAN Control
Network Settings
Set the network of the projector.
►
Automatically configuring the network settings from DHCP.
Check automatic setting and then click “Apply”.
►
Configuring the network settings manually.
Check manual setting, enter appropriate values in the IP
address, Subnet Mask, Default Gateway (Gateway) and DNS
Server fields, and then click "Apply".
IPV6 cannot be used
in this device.
N
o
t
e

Ricoh Mizar-PJ2 cw Series Specifications

General

Brand	Ricoh
Model	Mizar-PJ2 cw Series
Category	Projector
Language	English