48
English
User Settings
Network (Standby)
Enable/Disable the network function.
Network (Standby) On Off
On: Enable the network function at projector standby status.
Off: Disable the network function at projector standby status.
Network
Congure the network settings.
LAN
Network State Connected
DHCP On
IP Address
Subnet mask
Gateway
DNS
Apply
MAC
Select Enter Exit
Network State: Display the network connection status.
DHCP: Select On to allow the projector to obtain an IP address
automatically from your network. Select Off to manually
assign IP, Subnet Mask and Gateway conguration.
DHCP On Off
IP Address: Set an IP address or display IP address provided
from DHCP server when DHCP is set to On.
IP Address IP Address
Subnet mask: Set subnet mask number or display subnet mask
number provided from DHCP server when DHCP is set to On.
Gateway: Set the default gateway of the network connected
to the projector or display the default gateway of the network
provided from DHCP server when DHCP is is set to On.
To Next Page
Loading...
Need help?
General
