English
5
English
Usage Notice
b) Do not open the lamp cover of a machine that is
installed on a wall or ceiling. Doing so may cause the
lamp cover to fall down. If the lamp is broken, pieces of
glass may fall and cause an injury.
c) Contact your sales or service representative to clean
or replace parts for a machine that is installed on a wall
or ceiling.
d) If a machine is incorrectly installed on a wall or ceil-
ing, it may fall down and cause an injury. Contact your
sales or service representative if you want to install a
machine on a wall or ceiling.
e) Do not obstruct the machine’s vents. Doing so risks
re caused by overheated internal components.
f) For users, do not install the projector by yourself.
Contact your sales or service representative if you want
to install the projector on a wall or ceiling.
g) For sales or service representatives:
- Use brackets that are strong enough to support the
projector.
* PJ X5461 / WX5461 / HD5451 Series weighs less than 3.2kg.
- The projector must be installed in a location that is
sturdy enough to support the full weight of the projec-
tor and brackets.
- Use only the screws (three M4~16 screws) provided
with the projector to attach the brackets to the projector.
■ Caution- Keep the machine away from humidity and dust. Other-
wise a re or an electric shock might occur.
■ Caution- Do not place any objects on the machine. Doing so may
cause the machine to topple over, possibly resulting in
injury.
■ Caution- Do not place the machine on an unstable or tilted sur-
face. If it topples over, an injury might occur.
■ Caution- Do not place the machine or use it in an environment
where it might get wet such as from snow, rain, or be-
ing near water. Doing so could result in re or electric
shock.
■ Caution- Do not put your face or hand near the exhaust vents.
Doing so could result in burns or an accident due to hot
air coming from the exhaust vents.
■ Caution- Do not use the machine on soft material such as paper
or cloth that might get sucked into the intake vents.
Doing so may cause heat buildup inside the machine,
resulting in malfunction, burns, or re.
To Next Page
Loading...
Need help?
General
