Ricoh MP 2014 - Adjusting the Scanner Parameters

Scanner Unit
SM 4-26 D245/D246/D247
4.6.8 ADJUSTING THE SCANNER PARAMETERS
 Adjust the following SP modes after you replace the scanner unit or each part of the scanner
unit:
 SP4-008-001 (Sub Scan Mag. Adj): (page 4-69)
 SP4-010-001 (L-Edge Regist Adj): (page 4-69)
 SP4-011-001 (S-Edge Regist Adj): (page 4-69)
 SP4-688-001 (ADF Adj Density): Use this to adjust the density level if the image density of
outputs made in the DF and platen mode is different.