Destination, Original Type, File Type, Resolution, Original Orientation, Original Sides, Scan
Size, Preview
Classic Applications
• Copier (Classic):
original type, density, Original Settings, paper tray, Store File (except for User Name, File
Name, and Password), Auto Reduce / Enlarge, Create Margin, Finishing, Cover/Slip Sheet,
Edit / Stamp, Dup./Combine/Series, Reduce / Enlarge, number of copies
• Document Server (on the initial document print screen):
2 Sided Copy Top to Top, 2 Sided Copy Top to Bottom, Booklet, Magazine, Finishing,
Cover/Slip Sheet (except for Main Sheet Tray in Designate / Chapter), Edit / Stamp, number
of prints
• Fax (Classic):
Scan Settings, density, Original Feed Type, File Type, Store File (except for User Name, File
Name, and Password), Preview, transmission type, destinations (except for folder
destinations), Select Line, Adv.Features, memory transmission/immediate transmission,
Communi. Result Rep., TX Mode (except for Subject), SMTP
• Scanner (Classic):
Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security
Settings and Start No.), Store File (except for User Name, File Name, and Password),
Preview, Destinations selected from the Address Book, Subject / Text, Subject, Security,
Recept. Notice, File Emailing Method
This section explains how to register functions to a program by using each application.
Standard Applications/Quick Applications
1. Press the [Quick Copy] icon. Edit the settings so all functions you want to register to a
program are selected on the [Copy], [Fax], [Scanner], [Quick Copy], [Quick Fax], or
[Quick Scanner] screen.
2. Press [Menu] (
) at the bottom of the screen in the center.
3. Press [Reg. Current Setting to Program].
4. Press the program number you want to register.
5. Enter the program name.
6. Select the icon for the program.
7. Press [Previous Screen].
When you are using the quick application, press [Prev. Scrn.].
8. Press [OK].
Registering Functions in a Program
59
To Next Page
Loading...
Need help?
General
