Displays min. value of detected
voltage.
Displays the value of most recently
detected voltage.
Displays the detected voltage at
time of SC occurrence.
Displays detected voltage at STOP.
Sets the Inrush Control mode.
When using with an external power
supply instead of a commercial
power supply, set to "On".
[Off / On]
Sets the Flicker Control mode.
[Off / On]
Displays the fusing unit status.
0: New unit, 1: Old unit
Displays the registration sensor
status.
0: Paper present, 1: No paper
Displays the paper end sensor
status.
0: Paper present, 1: No paper
Displays the paper exit sensor
status.
0: Paper present, 1: No paper
Displays the fusing entrance
sensor status.
0: Paper present, 1: No paper
Displays the ITB contact sensor
status.
0: Spaced, 1: Contact
Toner Collection Full
Sensor
Displays the waste toner overflow
sensor status.
0: Not full, 1: Full
Toner Collection Set
Sensor
Displays the waste bottle set
sensor status.