EasyManuals Logo

Ricoh P C300W Field Service Manual

Ricoh P C300W
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #209 background imageLoading...
Page #209 background image
6.Troubleshooting
197
SC No.
Type
Error Name/Error Condition/Major Cause/Solution
EGB (PCB1) defective
AIO (C, M, or Y) overload
Check if the SC occurs by turning the power OFF then ON. If the SC occurs again,
do the following steps. Check if the SC reoccurs by cycling the power after each
step.
1. Replace the color drum motor (M1).
2. Reconnect the color drum motor (M1) connector.
3. Replace the color drum motor (M1) harness.
4. Replace the EGB (PCB1).
5. Replace the AIO (C, M, or Y).
SC 4xx (Image Transfer)
SC No.
Type
Error Name/Error Condition/Major Cause/Solution
SC400-
00
D
TM/P sensor (S8) error
The CPU detected a low voltage of the positive reflection output under the
threshold in the TM/P sensor.
A solid print out due to an electrostatic charging error
TM/P sensors (S8) are dirty.
TM/P sensor (S8) is defective.
Check if the SC occurs by turning the power OFF then ON. If the SC occurs again,
do the following steps. Check if the SC reoccurs by cycling the power after each
step.
1. Check the image transfer unit.
2. Clean the TM/P sensors (S8). (Cleaning Points > TM/P sensor)
3. Replace the TM/P sensor (S8) unit.
4. Replace the AIO cartridges.
SC No.
Type
Error Name/Error Condition/Major Cause/Solution
SC442-
00
D
ITB contact motor (M6) error
The ITB contact motor error is detected during the initialization at power-on or after
the cover is closed.
Motor overcurrent, high temperature
Check if the SC occurs by turning the power OFF then ON. If the SC occurs again,
do the following steps. Check if the SC reoccurs by cycling the power after each
step.
1. Replace the ITB contact motor (M6).

Table of Contents

Other manuals for Ricoh P C300W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh P C300W and is the answer not in the manual?

Ricoh P C300W Specifications

General IconGeneral
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)9.4 s
Time to first page (color, normal)9.8 s
Print speed (black, normal quality, A4/US Letter)25 ppm
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle30000 pages per month
Number of print cartridges4
Page description languagesPCL 5c, PCL 6, PostScript 3
Product colorBlack, White
Market positioningHome & office
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (printing)1300 W
Energy Star Typical Electricity Consumption (TEC)0.3 kWh/week
Duplex media weight60 - 90 g/m²
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight60 - 163 g/m²
Total input capacity250 sheets
Total output capacity150 sheets
Maximum input capacity751 sheets
Auto document feeder (ADF) input capacity1 sheets
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Mobile printing technologiesApple AirPrint, Google Cloud Print, Mopria Print Service
USB 2.0 ports quantity1
Built-in processor-
Sound pressure level (printing)- dB
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
Cables includedAC
Included cartridge capacity (black)1000 pages
Weight and Dimensions IconWeight and Dimensions
Depth450 mm
Width400 mm
Height334 mm

Related product manuals