No Description Q’ty
6 CD (*) 1
7 RGB Cable 1
8 Read This First 1
(*) This supplied CD-ROM contains a user’s manual in PDF format.
• Due to different applications in each country, some regions may have different accessories.
Precautions
Please follow all warnings, precautions and maintenance as recommended in this manual to maximize
the life of your unit.
• This apparatus must be earthed.
• Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes.
• To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
• Do not open or disassemble the projector as this may cause electric shock.
• When replacing the lamp, allow unit to cool down at least 60 minutes, and follow all replacement.
• Do not use lens cap when projector is powered on.
• When the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If
this happens, the projector will not turn back on until the lamp module has been replaced. To
replace the lamp, follow the procedures listed under “Replacing the Lamp”.
Main Machine Installation
15
To Next Page
Loading...
Need help?
General
